capacitor bank alvifar

Harga :
CALL
Merk :
alvifar
Pengiriman :
1 hari sejak pembayaran
Lokasi :
Dilihat :
1.071 Kali
Update Terakhir :
06-01-2013 07:01

Detail Produk

 

Electrical Protection Device :

 

  • Self-healing dielectric : this self-healing property is connected with the characteristics of the metal deposit which forms the electrode and the nature of the insulating support (polypropylene film)

- This special manufacturing technique prevents breakdown of the capacitor due to electrical overvoltages. 
- In fact overvoltages perforate the dielectric and cause discharges which vaporise themetal near the short circuit, thus instantaneously restoring the electrical insulation.

  • Internal fuses : one per winding.
  • Pressure monitoring devices if an electrical fault cannot be overcome by the film self-healing or by means of the electric fuse, gas is emitted, causing a membrane to deform and disconnecting the faulty winding.

These three protection devices, together with the vacuum coating of the windings (technique patented by ALPES TECHNOLOGIES), result in a very high-tech unit.

 




Discharge resistors :

- Fitted inside (except by special request), these discharge the unit in accordance with current standards (discharge time, 3 minutes).


Loss factor :

ALPIVAR have a loss factor of less than 0,1 x 10-3. 
- This value leads to a power consumption of less than 0.3 W per kVAr, including the discharge resistors.




Capacitance :

- Tolerance on the capacitance value : ± 5%. 
- Our manufacturing process, which avoids any inclusion of air in the coils, ensures excellent stability of the capacitance throughout the service life of the Alpivar capacitor.
 

  • Max. permissible voltage: : 
         1,18 Un rated
  • Max. permissible current : 
         Standard type : 1,3 In 
         Type H reinforced : 1,5 In
  • Insulation class : 
         Withstand at 50 Hz 1 min : 6 Kv 
         1,2/50μs impulse withstand : 25 kV

 


Standards :

- Alpivar capacitors comply with :

  • French : NFC 54 108 et 54 109
  • European : EN 60831-1 et 60831-2
  • International : CEI 60831-1 et 60831-2
  • Canadian : CSA 22-2 N° 190

- End of life performance tests performed successfully in EDF and LCIE laboratories.

 


Temperature class :

- Alpivar capacitors are designed for a standard temperature class -25°C / +55°C.

  • Maximum temperature : 55°C
  • Average over 24 hours : 45°C
  • Annual average : 35°C

- Other temperature classes on request.

 

 

Permintaan Penawaran